How to Install Windows 10 & 11 any Android Phone 2022 (Guide)

Today’s Mobile devices are much more powerful compared to those of the previous generation and that has been a major reason that these devices have become such a huge part of our lives. Now, a lot of activities can be done on mobile phones quickly instead of turning on a laptop or a PC.

Android mobile devices in particular are known for their flexibility and adaptability which the users love. What you might not know is that you can now install the Windows operating system, which is by far the most popular operating system for PCs and laptops on your android device. Today we will tell you how.

How to install Windows on any Android Phone (Snapdragon)

Installing Windows on android devices is finally possible with the “Renegade Project”. This Project is getting a lot of attention and support from everyone, By installing this on your android device you can play all the PC games on your android device. For instance, you can Play Games like GTA 4 and many others.

Requirements

  • You need a supported device, Check the list here.
  • A Working Brain.
  • Basic Computer Knowledge.
  • Always make a backup.

Download all the files in a USB flash drive:

diskpart
select disk 0
list part
select part 17    # 17 is the number of your ESP partition
assign letter=Y
exit

bcdedit /store Y:\efi\microsoft\boot\bcd /set {Default} testsigning on
bcdedit /store Y:\efi\microsoft\boot\bcd /set {Default} nointegritychecks on

shutdown -s -t 0

Windows Pre-Installation

You may need some additional steps for some devices so you can check your device list above via the mentioned link. You can also follow the official guide here.

Create Partitions

First, you need to install TWRP on your device. You can do that by searching your device name on google + TWRP and following that guide on how you can flash TWRP recovery on your android device.

Now Enter the TWRP Recovery and connect your device to PC.

Open CMD as Admin and run:

adb push parted /sdcard/
adb shell
  • Repartition your device. This can brick your device if not done properly.
cp /sdcard/parted /sbin/ && chmod 755 /sbin/parted
umount /data && umount /sdcard
parted /dev/block/sda
rm 17                           
mkpart esp fat32 6559MB 7000MB    
mkpart pe fat32 7000MB 10000MB   
mkpart win ntfs 10000MB 70GB     
mkpart userdata ext4 70GB 125GB   
set 17 esp on              
quit
  • Now all you have to do is format all the new partitions.
mkfs.fat -F32 -s1 /dev/block/by-name/pe
mkfs.fat -F32 -s1 /dev/block/by-name/esp
mkfs.ntfs -f /dev/block/by-name/win
mke2fs -t ext4 /dev/block/by-name/userdata
  • Now Simply Mount PE partition as /mnt
mount /dev/block/by-name/pe /mnt
  • Connect your USB to device’s OTG after that copy PE
cp -r /usbstorage/20h2pe_new/* /mnt
  • After that Reboot to system with TWR options.
  • Now make sure to boot in Android first. If this worked, We can proceed.

Install Windows on any Android Easily

Now Reboot the device to fastboot mode.

  1. Simply Boot UEFI
    • fastboot boot boot-DEVICE.img
  2. Now Enter the Windows PE
  3. After that Assign the Y letter to ESP partition:
    • diskpart
    • select disk 0
    • list part
    • select part 17
    • assign letter=Y exit
  4. Now we are finally here, All you have to do is install Windows ARM64.
  5. Launch dism++ to install Windows:
    • Open File >> Apply Image
    • Select the iso file location.
    • Select the C:\ root (or D:\ if C:\ is PE partition), the destination where windows needs to installed.
    • Now make sure to check Add Boot option.
    • Click ok, Now you have to wait for the image to be applied.
  6. Now you have to Install drivers:
    • After everything is done, select the new Windows installation from the top and then click "Open Session"
    • Go to the drivers section under Control Panel.
    • Click Add and navigate to the SDM845 Drivers folder.
    • Wait until the drivers are installed.
  7. Activate the Test-Signing mode.
  8. bcdedit /store Y:\efi\microsoft\boot\bcd /set {Default} testsigning on bcdedit /store Y:\efi\microsoft\boot\bcd /set {Default} nointegritychecks on
  9. Now Reboot to UEFI.
  10. Enjoy your Windows on android device: !shutdown -s -t 0

if you need any help or have any questions regarding the process make sure to leave a comment and we will be happy to help you. You can also watch the video mentioned above if you like the video explanation better.

Subscribe
Notify of
guest
1 Comment
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
rudi
rudi
5 months ago

how to revert back to android only,also change the partition back to stock?